Micro PLC

Micro PLC

Kompakti ja nopea ohjausjärjestelmä

Yhteenveto

MICRO CPU M13 C
Order Code: M13-CCF0001

  • Powered by SPEED7
  • Work memory [KB]: 128
  • Integrated: PROFINET controller (8 Devices) / I-Device
  • Optional: [2x RS485]: MPI, PROFIBUS slave, PtP: ASCII, STX/ETX, 3964 (R), USS master, Modbus master/slave
  • Onboard: 16x DI / 12x DO / 2x AI [configurable: voltage 0...10 V / current 4...20 mA] / 4x Counter / 2x [PWM/Pulse Train]
  • Interface [2x RJ45]: active Ethernet PG/OP communication with DHCP support, switch, ModbusTCP master/slave, openCommunication, I-Device, PROFINET IO controller
  • OPC UA / Web server
  • SD card slot with locking, up to 8 expansion modules, configurable via SPEED7 Studio, SIMATIC Manager and TIA Portal
  • Tehosyöttö
  • x Ei
  • Input Voltage
  • x Ei
  • Current Consumption
  • x Ei
  • Max. current drain at backplane bus
  • x Ei
  • Max. current drain load supply
  • x Ei
  • Current consumption from backplane bus
  • x Ei
  • Current consumption from load voltage L+ (without load)
  • x Ei
  • Power Loss
  • x Ei
  • Number of inputs (digital)
  • x Ei
  • Rated load voltage (digital)
  • x Ei
  • Current consumption from load voltage L+ (without load)
  • x Ei
  • Signal logic input (digital)
  • x Ei
  • Input characteristic curve (digital)
  • x Ei
  • Initial data size (digital)
  • x Ei
  • Number of outputs (digital)
  • x Ei
  • Rated load voltage (digital output)
  • x Ei
  • Current consumption from load voltage L+ (without load)
  • x Ei
  • Signal logic output (digital)
  • x Ei
  • Initial data size (digital)
  • x Ei
  • Number of inputs (analog)
  • x Ei
  • Rated load voltage (analog)
  • x Ei
  • Current consumption from load voltage L+ (without load)
  • x Ei
  • Voltage inputs (analog)
  • x Ei
  • Current inputs (analog)
  • x Ei
  • Resolution in bit
  • x Ei
  • Measurement principle
  • x Ei
  • Basic conversion time
  • x Ei
  • Initial data size
  • x Ei
  • Number of outputs (analog)
  • x Ei
  • Output voltage ranges
  • x Ei
  • Output current ranges
  • x Ei
  • Resolution in bit (analog)
  • x Ei
  • Conversion time (analog)
  • x Ei
  • Output data size (analog)
  • x Ei
  • Number of counters
  • x Ei
  • Counter width
  • x Ei
  • Maximum input frequency
  • x Ei
  • Maximum count frequency
  • x Ei
  • Maximum count frequency
  • x Ei
  • Maximum count frequency
  • x Ei
  • Maximum count frequency
  • x Ei
  • Number of channels
  • x Ei
  • Input voltage (rated value)
  • x Ei
  • Power stage
  • x Ei
  • PWM frequency
  • x Ei
  • Type of encoder
  • x Ei
  • Encoder frequency
  • x Ei
  • Encoder resolution (internal)
  • x Ei
  • Control type
  • x Ei
  • Terminal voltage max.
  • x Ei
  • Terminal current max.
  • x Ei
  • Total current per module, max.
  • x Ei
  • Number of clamps
  • x Ei
  • Binding of potential
  • x Ei
  • Point-to-point protocol
  • x Ei
  • Encoder Supply: Number of outputs (L+n)
  • x Ei
  • Rated output current
  • x Ei
  • Port mode
  • x Ei
  • Load memory, integrated
  • x Ei
  • Work memory, integrated
  • x Ei
  • Work memory, maximal
  • x Ei
  • Memory card slot
  • x Ei
  • Racks, max.
  • x Ei
  • Modules per rack, max.
  • x Ei
  • Fieldbus
  • x Ei
  • Connector
  • x Ei
  • Topology
  • x Ei
  • Transmission speed, max.
  • x Ei
  • Address range inputs, max.
  • x Ei
  • Address range inputs, max.
  • x Ei
  • Material
  • x Ei
  • Mounting
  • x Ei
  • Dimensions Weight
  • x Ei
  • Dimensions Height
  • x Ei
  • Dimensions Depth
  • x Ei
  • Net weight
  • x Ei
  • Gross weight
  • x Ei
  • Certifications
  • x Ei
  • Safety protocol
  • x Ei
  • Safety requirements
  • x Ei
  • Circuit monitoring
  • x Ei
  • Operating temperature Min
  • x Ei
  • Operating temperature Max
  • x Ei
Käsittelee tietoja… Kirjoita nimi, kuvaus, tuote tai avainsanoja Näyttää _START_ – _END_ / _TOTAL_ kokonaismäärä Suodatettu _MAX_ kokonaismäärä Ei tietoja Ei tietoja First Last Järjestä nousevasti Järjestä laskevasti

Lataukset

Nimi
M13-CCF0000 A1 V03 00 04 00
Firmware for PLC System MICRO (CPU M13-CCF0000) Firmware files have the following name structure: Name_ax_Vyyy.zip Name = name/order number of module, e.g. CPU 315-2AG13 ax = hardware version, e.g. a1 for release 1, a2 for release 2 Vyyy ... = firmware version e.g. V3061500 for version 3.6.15 Firmware | englanti
Firmware englanti
CPU M13C - M13-CCF0001
Datenblatt für MICRO CPU M13 Datalehti | saksa
Datalehti saksa
CPU M13C - M13-CCF0001
Datasheet for MICRO CPU M13 Datalehti | englanti
Datalehti englanti
CPU M13-CCF0001 - SPEED7 CPU M13C
Rev. 24-04 || MICRO SPEED7 CPU M13C (DI 16xDC24V, DO 12xDC24V 0.5A, AI 2x12Bit U/I) || HW: 01 | CPU-FW: V3.0.13 Technical documentation | englanti
Technical documentation englanti
CPU M13-CCF0001 - SPEED7 CPU M13C
Rev. 24-04 || MICRO SPEED7 CPU M13C (DI 16xDC24V, DO 12xDC24V 0,5A, AI 2x12Bit U/I) || HW: 01 | CPU-FW: V3.0.13 Technical documentation | saksa
Technical documentation saksa
CPU M1x - SPEED7 - Operationsliste
Rev. 24-02 || MICRO Befehlsliste, OBs, SFBs, FBs, SFCs, VIPA spezifische Bausteine, Systemzustandsliste SZL Technical documentation | saksa
Technical documentation saksa
CPU M1x - SPEED7 - Operation list
Rev. 24-02 || MICRO Instructions, OBs, SFBs, FBs, SFCs, VIPA specific blocks, System Status List SSL Technical documentation | englanti
Technical documentation englanti
UK-Declaration of Conformity - MICRO
state: 04.02.2022 Certification | englanti
Certification englanti
EU-Declaration of Conformity - MICRO
state: 04.02.2022 Certification | englanti, saksa
Certification englanti, saksa
YASKAWA Controls MTBF Technical documentation | englanti Technical documentation englanti
GSDML File for the MICRO-PLC - I-Device-Function
Configutation file for the I-Device-Function from the MICRO-PLC Settings file | englanti
Settings file englanti
GSDML File for the MICRO-PLC
Configuration file for VIPA MICRO CPU Settings file | englanti
Settings file englanti
M13-CCF0001 A1 V03 00 16 00
Firmware for PLC System MICRO (CPU M13-CCF0001) Firmware files have the following name structure: Name_ax_Vyyy.zip Name = name/order number of module, e.g. CPU 315-2AG13 ax = hardware version, e.g. a1 for release 1, a2 for release 2 Vyyy ... = firmware version e.g. V3061500 for version 3.6.15 Firmware | englanti
Firmware englanti
M13-CCF0001 A1 V03 00 13 00
Firmware for PLC System MICRO (CPU M13-CCF0001) Firmware files have the following name structure: Name_ax_Vyyy.zip Name = name/order number of module, e.g. CPU 315-2AG13 ax = hardware version, e.g. a1 for release 1, a2 for release 2 Vyyy ... = firmware version e.g. V3061500 for version 3.6.15 Firmware | englanti
Firmware englanti
3D-Data MICRO CPU
MICRO CPU CAD/CAE | englanti, saksa
CAD/CAE englanti, saksa
M13-CCF0001 A1 V03 00 20 00
Firmware for PLC System MICRO (CPU M13-CCF0001) Firmware files have the following name structure: Name_ax_Vyyy.zip Name = name/order number of module, e.g. CPU 315-2AG13 ax = hardware version, e.g. a1 for release 1, a2 for release 2 Vyyy ... = firmware version e.g. V3061500 for version 3.6.15 Firmware | englanti
Firmware englanti
Yaskawa System Micro | ChinaRoHS Certification | Certification
System MICRO ePLAN Macros
Rev. 17-46 EPLAN | englanti
EPLAN englanti